ANSYS APDL - Advanced

ANSYS MAPDL (Classic) is the leading software solution that uses finite element analysis (FEA) for various analyses/simulations using the ANSYS Mechanical interface. It covers an enormous range of applications in the field of mechanical, aerospace, bio-medical, automotive, structural, and much more in 3 phases i.e., pre-processing, solution & post-processing. 

45

Lectures

20

Quizzes

90 Hours

Duration

Advanced

Skill level

ANSYS Mechanical APDL (Classic) is the leading software solution that uses finite element analysis (FEA) for various analyses/simulations using the ANSYS Mechanical interface. It covers an enormous range of applications in the field of mechanical, aerospace, bio-medical, automotive, structural, and much more in 3 phases.   Ansys MAPDL advance is also used to model advanced materials, complex environmental loadings, and industry-specific requirements in areas such as offshore hydrodynamics and layered composite materials as well.

This course is recommended for anyone who wishes to perform Finite Element Analysis (FEA) of different parts/assemblies and basic knowledge on ANSYS Mechanical APDL advance(MAPDL) software experience. The course focuses on advanced topics such as complex geometries, non-linearities, scripting, convergence debugging, contact options, Sub-modelling, Buckling, Thermal, Modal, results in interpretations, Quizzes, Assignments, & so on.

  • FEM Fundamentals
  • Simple Modeling Techniques
  • Meshing options
  • Properties – Linear & Non-Linear
  • Based on type of analysis
  • Orthotropic & Anisotropic
  • Model splits
  • Customized work plan for editing models
  • Component creation
  • Connectivity Check
  • Model clean-up
  • Boolean Operation
  • Mesh as per analysis    
  • Smart Sizing    
  • Volume Control  
  •  Sweep Options    
  • Node alignment & Node merge    
  • Mesh connectivity Check  
  • Special elements- mass, stiffness etc    
  • Mesh Quality, checks & statistics etc
  • Need, Importance, use of contacts    
  • Types of contacts    
  • Contact creation    
  • Contact options & settings    
  • Contact gap & penetration    
  • Contact checks & validation
  • Customized BC’s    
  • Specific loads –
    • varying loads
    • acceleration
    • Omega
    • Torque
    • surface etc    
  • Couplings
  • Theory of types of analysis & its applications    
  • Types of analysis
    • Linear
    • Buckling
    • Modal etc    
  • Non-Linear analysis
    • geometric
    • Contact
    • Material    
  • Sub-Modelling    
  • Loads & multi- load step creation    
  • Solution types, restart options    
  • Control options, output options    
  • Simple commands & calculations    
  • Array & table creation for repeated loads    
  • Looping systems    
  • Import & export table format data    
  • Graphic plots – Deflection, stress, Temperature, Strain etc    
  • Vector & Path plots    
  • Accuracy & Mesh check    
  • Load transfer verification    
  • Contact behavior plots (Gap, Penetration,Pressure etc)
  • Summarizing details    
  • Presentation guidance

ANSYS MAPDL (Classic) is the leading software solution that uses finite element analysis (FEA) for various analyses/simulations using the ANSYS Mechanical interface. It covers an enormous range of applications in the field of mechanical, aerospace, bio-medical, automotive, structural, and much more in 3 phases i.e., pre-processing, solution & post-processing. Ansys Mechanical APDL is also used to model advanced materials, complex environmental loadings, and industry-specific requirements in areas such as offshore hydrodynamics and layered composite materials as well.

This course is recommended for anyone who wishes to perform Finite Element Analysis (FEA) of mechanical parts and has little or no ANSYS Mechanical APDL (MAPDL) software experience. The ANSYS Mechanical APDL workflow, graphical user interface, along with the APDL command syntax, will be introduced to users. The focus will be on linear static structural analyses, although the concepts presented will provide a strong foundation to allow the user to solve other physics, such as thermal analyses, or more complicated analysis procedures with ANSYS MAPDL. After completing the course, attendees shall be able to use the ANSYS Mechanical APDL software efficiently to set up, solve, and post-process linear static analyses.

Please note that for those wishing to learn the Workbench version of ANSYS Mechanical should attend the “Introduction to ANSYS Mechanical” training course instead.

  • Introduction to the Finite Element Method
  • What is the Finite Element Method?
  • History
  • About ANSYS
  • ANSYS Basics
  • ANSYS Classic Environment
  • GUI – Graphics and Picking
  • The Database and Files
  • Saving Files
  • Exiting ANSYS
  • File Types
  • Overview
  • Preliminary Decisions
  • Preprocessing
  • Solution
  • Post processing
  • Simple Model creations
  • Hierarchy of model elements & its connections
  • Import of CAD model
  • Work Plane creation & importance
  • Boolean Operations
  • Operational commands
  • Model Connectivity
  • Model Checks
  • Setting Element Attributes
  • Element Type selection & its options
  • Section properties,Real Constants
  • Assigning Element Attributes
  • Free Mesh & Mapped Mesh
  • Mesh Controls
  • 3D Mesh – Hex, Tet, Hybrid
  • Mesh Connectivity
  • Mesh Quality & Checks
Overview
ANSYS APDL - Advanced
Curriculum

Enroll Now

pro

9999 /90 hrs
11999
  • Instructor Led Online
  • Certification On Completion
  • Course Content: Available
  • Clarification: After Course (3 Months)
  • Rejoin Any Batch
  • One Time Payment
  • WhatsApp Group Support
  • Industry Projects: Available
  • Contact For Group Enrollments

pro+

11999 /90 hrs
13999
  • Direct Classes
  • Certification On Completion
  • Course Content: Available
  • Clarification: After Course (3 Months)
  • Rejoin Any Batch
  • One Time Payment
  • WhatsApp Group Support
  • Industry Projects: Available
  • Contact For Group Enrollments

premium

13999 /90 hrs
15999
  • Direct Interaction/ Online
  • Certification On Completion
  • Course Content:  Customized
  • Clarification: After Course (3 Months)
  • One- On -One Session
  • One Time Payment
  • WhatsApp Support
  • Industry Projects: Available
  • Contact For Group Enrollments
Post Your Comment