STAAD PRO - Advanced

STAAD Pro is the most powerful software that can design almost any kind of civil engineering structure such as steel, concrete, timber, aluminum, and cold-formed steel designs. It Solves the most complex design and analysis problems faster than ever before with STAAD.Pro





90 Hours



Skill level

There is a need for competent, skilled and technically strong professionals who can crack highly technical problems with ease. Staad Pro is handy for quick analysis of most of the structures. It is widely used in infrastructure design like tunnels, bridges and culverts. It can Tackle projects of any scale and analyze complex models with over 20,000 nodes at optimum speed. Design under any static or dynamic loading conditions, meeting the highest seismic building standards. Complete intricate projects quicker, including large or complicated models with multiple load cases and combinations. Quickly perform Eigen, Ritz, Nonlinear, P-Delta analysis, thermal loading, and more. Leverage integrated concrete member design, detailing, and documentation using the Advanced Concrete Design workflow.


This course teaches how to create physical modeling that reflects the process of building a model; load combinations as per code requirements for both shear walls and seismic structures; concrete design of beams, columns and slabs in the building; steel frame structural frames for the wind loads; Interpolation and results from the validation of beams and frame and much more.

By the end of the course, one could be able to perform complex models both in concrete with seismic structures, shear walls, irregular building and steel structures with wind loads and much more.

  • Recap of Module 1

  • Shear wall modeling
  • Load application
  • Load case
  • Wind loads
  • Seismic Load calculations
  • Load combinations
  • Analysis settings
  • Validation
  • High Rise RCC structures analysis
  • Design & Reinforcement
  • Combination of steel & concrete structures
  • Need of response spectrum
  • Modeling
  • Member properties
  • Shear wall modeling
  • Load application
  • Load case
  • Model Checks
  • Analysis settings
  • Validation
  • Importance of time history
  • Time history parameters
  • Load specifications
  • Supports
  • Analysis
  • Shear force, bending moment & displacement
  • Shell Model simulation
  • Cable analysis – pretension bridge
  • Misc
  • Summary & Conclusion

ANSYS MAPDL (Classic) is the leading software solution that uses finite element analysis (FEA) for various analyses/simulations using the ANSYS Mechanical interface. It covers an enormous range of applications in the field of mechanical, aerospace, bio-medical, automotive, structural, and much more in 3 phases i.e., pre-processing, solution & post-processing. Ansys Mechanical APDL is also used to model advanced materials, complex environmental loadings, and industry-specific requirements in areas such as offshore hydrodynamics and layered composite materials as well.

This course is recommended for anyone who wishes to perform Finite Element Analysis (FEA) of mechanical parts and has little or no ANSYS Mechanical APDL (MAPDL) software experience. The ANSYS Mechanical APDL workflow, graphical user interface, along with the APDL command syntax, will be introduced to users. The focus will be on linear static structural analyses, although the concepts presented will provide a strong foundation to allow the user to solve other physics, such as thermal analyses, or more complicated analysis procedures with ANSYS MAPDL. After completing the course, attendees shall be able to use the ANSYS Mechanical APDL software efficiently to set up, solve, and post-process linear static analyses.

Please note that for those wishing to learn the Workbench version of ANSYS Mechanical should attend the “Introduction to ANSYS Mechanical” training course instead.

  • Introduction to the Finite Element Method
  • What is the Finite Element Method?
  • History
  • About ANSYS
  • ANSYS Basics
  • ANSYS Classic Environment
  • GUI – Graphics and Picking
  • The Database and Files
  • Saving Files
  • Exiting ANSYS
  • File Types
  • Overview
  • Preliminary Decisions
  • Preprocessing
  • Solution
  • Post processing
  • Simple Model creations
  • Hierarchy of model elements & its connections
  • Import of CAD model
  • Work Plane creation & importance
  • Boolean Operations
  • Operational commands
  • Model Connectivity
  • Model Checks
  • Setting Element Attributes
  • Element Type selection & its options
  • Section properties,Real Constants
  • Assigning Element Attributes
  • Free Mesh & Mapped Mesh
  • Mesh Controls
  • 3D Mesh – Hex, Tet, Hybrid
  • Mesh Connectivity
  • Mesh Quality & Checks
STAAD PRO - Advanced

Enroll Now


12999 /90 hrs
  • Instructor Led Online
  • Certification On Completion
  • Course Content: Available
  • Clarification: After Course (3 Months)
  • One Time Payment
  • WhatsApp Group Support
  • Industry Projects: Available
  • Contact For Group Enrollments


14999 /90 hrs
  • Instructor Led Online
  • Certification On Completion
  • Course Content:  Customized
  • Clarification: After Course (3 Months)
  • One-On-One Session
  • One Time Payment
  • WhatsApp Support
  • Industry Projects: Available
  • Contact For Group Enrollments
Post Your Comment